Once your're done the valve
ball seat should be nice and shiny clean. Time to put things back together.
Before we go on to the next
step you'll want to back that screw out just a bit, to where it is just
holding itself in the retainer. If it's still in too tight when you go
to back it out at the end of the process the retainer migh just spin and
you'll have to pull it apart again to loosen the screw. Teh more times
the retainer is removed the less effectively it holds.
I have big stubby fingers so
I use a fine tipped needlenose pliers to hold the spring wile I push the
nylon retainer back onto the spring as shown. |
